Alarm; Face - EverFocus H265 Series User Manual

3.5.3

Alarm

You can configure the Alarm settings on this page.

3.5.3.1 Face

On this page, you can use to configure the Face detection alarm settings here.
[ Face Alarm Settings ]
Alarm Output: When trigger alarm, the external alarm device output alarm time, can selected time
period is 5S,10S, 20S, 30S.
Post Recording: After triggered alarm, the post record time, selected time period is OFF, 5S, 10S, 20S, 30S.
Send Email: If trigger alarm, send the Email to notify, the Email setup need to set in Remote
Setting –Network-Email.
FTP Pic.Upload: Whether to upload the alarm information to the FTP server when the camera triggers
the IO alarm.
Picture to Cloud: When the camera triggers the IO alarm, whether to upload the screenshot to the FTP
server.
Alarm Out: Trigger alarm then if will be I/O output.
Enable Recording: Enable to record. To further configure recording schedule, click the Schedule
button to set up record schedule.
Click Refresh to refresh the page; click Save to save the settings.
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
44