Table of Contents
Advertisement
7.
Press [Resolution...].
8.
Select the desired resolution, and then press [OK].
9.
Confirm the resolution you selected is displayed, and then press [OK].
• You can change the machine's default [Resolution] setting to always scan with a specific resolution
level. For details, see page 222 "Scanner Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] while the
initial screen is displayed. For details, see page 251 "Administrator Tools Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Specifying Scan Settings for Scanning
167
Advertisement
Table of Contents
Troubleshooting
