Cleaning The Reservoir And The Water Circuit Manually - Smeg SO4303APX Manual

2. Touch the sub-menu
the lower area
3. Touch the DESCALING button
4. Proceed with descaling as described in the
previous paragraphs.
Cleaning the reservoir and the water
circuit manually
This function allows you to clean the
reservoir and the water circuit of the
appliance.
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu
the lower area
3. Touch the CLEAN RESERVOIR
button.
Preliminary operations
1. Fill a jug or a container with approx. 2 litres
of water.
2. Open the appliance door.
3. Place the jug (or container) on the open
door.
The jug (or container) with the water
must have a gross weight lower than 5
kg.
4. Remove the loading wand from its holder.
• To remove the loading wand, press on the
front of the wand until the spring contracts,
then release.
130 - CLEANING AND MAINTENANCE
button (located in
).
.
button (located in
).
or
• Touch the WAND button
display (positioned in the lower area
Pay attention to the distance to be
maintained so as not to be hit by the
wand projection.
5. Place the end of the tube at the bottom of
the jug (or container).
6. Press the start
appliance reservoir with water.
7. Touch the CONFIRM
that you have finished filling the reservoir.
The appliance starts the function using the
parameters set.
Cleaning the water circuit
• When cleaning the reservoir and the
hydraulic circuit, leave the jug on the door
open with the loading wand inside. The
appliance cyclically discharges certain
quantities of water used for cleaning.
• During this process, the overflowing of water
inside the oven cavity is not intended as a
malfunction, rather it is part of the rinsing
procedure.
End of water circuit cleaning
8. After completion of the cleaning process the
request to drain the water is shown on the
display.
on the
button to start filling the
button to confirm
91477A327/A
).