Table of Contents
Advertisement
sound.
Reactivating the display
To reactivate the display when it is off:
• Press and hold the ON-OFF
button for a few seconds until you hear a
series of sounds.
The display turns on after a few seconds.
The display shows the main menu when it is
switched on again.
In some cases, the ON-OFF
button does not deactivate the display.
For example, when:
• there is a cooking function in
progress (the button stops the
function);
• the door is open;
• a minute minder timer is active;
• the
Demo modes are active.
Using the oven
See General safety instructions.
Traditional cooking
Each time the door is opened, the
function in progress will stop and then
automatically restart when the door is
closed again.
1. Touch the time indicated on the display.
2. Touch the COOKING
"main menu" (in the main area
90 - USE
Showroom and/or
button on the
).
3. Touch the TRADITIONAL COOKING
MENU
button.
4. Select a combination function (for example
FAN-HEATED
cooking screen.
5. Touch the START
right
) to start pre-heating.
Preheating stage
Cooking itself is preceded by a preheating
stage, which allows the appliance to heat to the
cooking temperature more quickly.
This stage is indicated by a progressive increase
in the temperature level reached.
Unless otherwise indicated in the
recipe, it is not recommended to place
food in the oven during the preheating
stage.
You can skip the pre-heating phase by
pressing the button
After pre-heating, a buzzer will sound and a
message will display to indicate that the food
can be put in the oven.
Cooking phase
1. Open the door
2. Place the dish with the food to be cooked
into the oven cavity.
3. Close the door.
4. Touch the START
cooking.
This stage is indicated by a progressive increase
) to enter the relevant
button (at the lower
related.
button to start
91477A327/A
Advertisement
Table of Contents
