Cleaning And Maintenance; Cleaning The Appliance - Smeg SO4303APX Manual

Table of Contents

Advertisement

3. Touch the CONFIRM
activate the desired weight unit.
System info
Menu displaying information about
serial number and software versions.
• In the "settings menu
SYSTEM INFO
the lower area
Showrooms
Menu dedicated to showrooms.
• Touch the SHOWROOMS
the "settings menu
lower area
).
Show Room (for showrooms only)
This mode deactivates all the
appliance's heating elements, while
keeping the control panel active.
During normal operation, it is indicated
by the
indicator light turning on in
the information area
To use the appliance normally, set this
mode to Off.
1. Select
Show Room.
2. Select On.

CLEANING AND MAINTENANCE

Cleaning the appliance

See General safety instructions.
Cleaning the surfaces
To keep the surfaces in good condition, they
should be cleaned regularly after use. Let them
cool first.
91477A327/A
button to
" touch the
button (at the right in
).
button on
" (at the centre of the
.
Touch the CONFIRM
3.
activate the Show Room mode
Demo Mode (for showrooms only)
The same as Show Room, when this
mode is activated, after a certain period
of inactivity, a demonstration of the
various screens that illustrate the
potential of the appliance is shown on
the display.
To use the appliance normally, set this
mode to Off.
1. Select
Demo Mode.
2. Select On.
3. Touch the CONFIRM
activate the demo mode.
Restore settings
This restores all settings to the original
factory settings.
The operation also deletes personal
recipes.
• Touch the FACTORY RESET
the "settings menu
lower area
).
1. Touch the Yes button if you want to restore
the original factory operations.
2. Touch the No button to cancel the
operation.
Ordinary daily cleaning
Always and only use specific products that do
not contain abrasives or chlorine-based acids.
Pour the product onto a damp cloth and wipe
the surface, rinse thoroughly and dry with a soft
cloth or a microfibre cloth.
Food stains or residues
Do not use steel sponges and sharp scrapers as
they will damage the surface.
Use normal, non-abrasive products and a
CLEANING AND MAINTENANCE - 125
button to
.
button to
button on
" (at the centre of the
or

Advertisement

Table of Contents
loading

Table of Contents