In The Event Of A Blackout; Settings - Smeg SO4303APX Manual

14. Touch the CONFIRM
that you have finished filling the reservoir.
Manual reservoir draining
Function for draining water (or other
liquids) from the reservoir.
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu
the lower area
3. Touch the RESERVOIR DRAIN
button.
4. Place a jug or container on the open door.
5. Remove the loading wand from its holder.
6. Press the START
the water into the jug (or container).
When complete, the display will indicate that
the residual water removal process is complete.
7. Touch the CONFIRM
8. Shake the loading wand in order to remove
any remaining water.
9. Place the loading wand back in its holder.
10. Remove the jug (or container).
11. Close the door.
For the cleaning function VAPOR CLEAN
(only on some models) and the cleaning
functions of the sub-menu
CLEANING AND MAINTENANCE.
91477A327/A
button to confirm
button (located in
).
button to start draining
button.
, see the chapter

In the event of a blackout

Following a power failure during a function, the
appliance automatically resumes the function it
was performing, maintaining all the previous
settings and discounting the time already
elapsed of the function only if:
• the duration of the power failure is less than
or equal to 60 seconds;
• the function does not include the use of
microwaves (depending on the model);
• the pyrolytic function is in progress
(depending on the model);
• the Sabbath function is in progress
(regardless of power failure time).
If the power failure occurs in a condition other
than those described above, the appliance
remains waiting for manual consent to continue
or not the function from the user for a certain
time.
If the function is reactivated, the cooking settings
remain as they were before the blackout, taking
into account the time already elapsed.
If there is no intervention by the user, the
appliance cancels the function and the display
shows the current time again.
(SmegConnect models only) A
notification also appears in the app
when you reconnect.
Blackout during a programmed function
If the power failure occurs while a programmed
cooking process is set:
• If the blackout is restored within the set start
time, the appliance remains in standby
mode updating the time until start.
• If the blackout is restored after the set start
time, the device waits for the function to start
and, if after a certain time there is no
intervention by the user, the appliance
cancels the function and the display shows
again the current time.

Settings

In the event of a temporary power cut,
all personal settings will remain stored.
The product configuration can be set using this
menu.
• Touch the SETTINGS
main menu (at the right in the lower area
).
button on the
USE - 121