Button Lock; Led Display; Parking Light - Autopage TRX96 Operation Manual

B. BUTTON LOCK:
It is useful if you want to disable the transmission function of the remote control
temporarily to prevent from any inadvertent pressing of buttons by others.
1. The XT-85s Standard transmitter:
Press the button first, within 3 seconds press and hold the
button for 2 seconds to activate or cancel the button lock function. The "Red
LED" will pause flash for few seconds to indicate the remote control
transmitter is on "Button Lock" mode when pressing the transmitter button.
2.
The 2-way LCD transmitter:
Press the button first, within 3 seconds press
and hold the ( ) button for 2 seconds to activate
or cancel the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the
" mode.

"Button Lock

C. LED display:
LED Function
Off Disarmed
Slow Flash Armed
Flash Passive Starter Disable
Fast Flash Passive Arming
On (Solid) Valet Mode
D. CHIRP INDICATORS:
Chirp Function
1 chirp Arm
2 chirps Disarm
3 chirps Defective
Reminder
4 chirps Disarm / Triggered
6 chirps Car Locator
F. ALARM OPERATING CONDITION:
LED Function
Zone 1 / Warn-Away Trigger
2 flashes...
Zone 2 / Trigger on Trunk/Hood
pause
3 flashes...
Zone 3 / Trigger on Door Switch
pause
4 flashes... Zone 4 / Trigger on Shock
pause Sensor
5 flashes... Zone 5 / Trigger on Ignition
pause Switch
E. PARKING LIGHT:

Parking light

Function
1 flash Arm
2 flashes Disarm
3 flashes Disarm / Triggered
12 flashes Car Locator
Constant On Under
Start
13
( )
Remote