Table of Contents
Advertisement
C3-RS-625
PROFESSIONAL 2-WAY AM/AM REMOTE CAR STARTER
&
KEYLESS ENTRY SYSTEM
With Two-way Serial Port Data Link
Compatible
Please see page 15 of this manual for more details
OPERATION MANUAL
Please register your product at:
www.autopageusa.com
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
1
Advertisement
Table of Contents
Related Manuals for Autopage C3-RS-625
Summary of Contents for Autopage C3-RS-625
- Page 1 C3-RS-625 PROFESSIONAL 2-WAY AM/AM REMOTE CAR STARTER & KEYLESS ENTRY SYSTEM With Two-way Serial Port Data Link Compatible Please see page 15 of this manual for more details OPERATION MANUAL Please register your product at: www.autopageusa.com THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY...
-
Page 2: System Operations
SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while the vehicle is running on remote control. -
Page 3: Changing The Battery
CHANGING THE BATTERY IN YOUR TRANSMITTERS XT-33: This transmitter uses two (2) 3-volt lithium ion batteries (#CR2016) that are sandwiched together with the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver. Locate the small notch on the lower right side of the transmitter case next to the key ring. -
Page 4: Silent Locking/Unlocking/Active Unlock
SILENT LOCKING / UNLOCKING: Pressing the buttons together on the transmitter will lock or unlock your system, No chirp sound will be heard. Lock / unlock confirmation will be seen through the vehicle’s parking lights only. ACTIVE UNLOCK: 1. Press button on the transmitter. -
Page 5: Valet Mode/Panic Function
You can now start and operate the vehicle normally. VALET MODE: The valet switch allows you to temporarily bypass all system function, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain operational. -
Page 6: Safety Start Operation
turned “OFF”. TRUNK RELEASE (Additional Installation Required) Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices. CAR LOCATOR (ONLY IF SIREN or HORN IS INSTALLED) Press the button twice when the system is armed to active car locator function. -
Page 7: To Turn Off The Remote Start
vehicle will remote start or remote shut down. (Programming Required) NOTE: The Remote Start Unit w ill not start the vehicle if any one of the following conditions exists: 1. The hood is opened. 2. The brake pedal is pressed. 3. -
Page 8: Shutdown Input For Remote Starter
A maximum of six cycles can occur. ENTER: 1. Press the button once to remote start the vehicle. As soon as the vehicle is running the parking lights will turn ‘ON’. 2. Immediately press the button then press button. The parking light will flash (3) times. -
Page 9: Battery Replacement
Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote... - Page 10 LCD screen lamp turns on for 5 seconds. Clear the Flash Icon and Press within 3 Melody Sound seconds 1. Second Vehicle Security Operation: Your remote transmitter can be utilized to control a second vehicle’s Auto Page security system. To...
- Page 11 program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. All programming parameters are the same except for the following: For Regular Remote Control Transmitter: 1. Prior to pushing any button on the transmitter. Press the Select II button first on the standard transmitter.
-
Page 12: Vibration/Melody Mode
Vibration / Melody Mode: Vibration mode is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control. In this mode the unit will vibrate if your security system is triggered. 1. -
Page 13: Stop The Trigger Melody Sound
After one (1) year, the purchaser should ship the unit prepaid to Auto Page with a money order in the amount of $30.00 to cover shipping and handling charges. - Page 14 Any equipment or parts which are claimed to be defective under this WARRANTY must be sent to the Auto Page Service center with “proof of purchase” at the purchaser’s expense prior to such return, a Return Authorization Number should be obtained. Auto Page will return the equipment, charges prepaid.
- Page 15 Warning: Some batteries may contain Perchlorate What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater, surface water and soil. Most perchlorate manufactured in the U.S. is used as an ingredient in solid fuel for rockets and missiles. In addition, perchlorate-based chemicals are also used in the construction of highway safety flares, fireworks, pyrotechnics, explosives, common batteries, and automobile restraint systems.
- Page 16 It is recommended to have a minimal digital service plan on your cell phone Your RS-625 is CI3 compatible and will open your world to the true power of two way communication. Complete tracking and full cell phone functionality can be added to your system. For more information please visit your local authorized Autopage dealer or go to www.autopageusa.com...
- Page 17 Compatible 2-Way Communication to the Power of 3 960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com...