Engine Starting
Your vehicle engine
starting by remote
control
Timer Control Start
Start the Engine
automatically at the
same time next day or
every 3-hour.
Time Monitor
Count Down Timer
Reminder when time is
up for parking
Vibration Mode
Remote Control vibrates
when the system is
triggered
Driver paging
Someone is paging you
in front of your vehicle
C: PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
(1 second)
(3 seconds)
(5 seconds)
-
-
-
(2-second)
-
(2-second)
-
(2-second)
Description
LCD screen lamp turns on
for
5 seconds.
Timer Programming Mode.
Power Save Mode
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Button Lock (
) enable /
disable
Melody / Vibration (
Mode
Program Count Down Timer
(
) (10-Minute / 20M / 30
M /1Hour /1.5H / 2.0H)
7
Engine Running
Your vehicle's engine is
running
Temperature Monitor
Indoor temperature of your
vehicle
Alert Alarm
You have set morning call
alarm
Power Save Mode
Save the battery power
Button Lock
Disable the transmission
function temporarily
Low Battery
You have to replace the
battery of remote control.
Operation
Press and hold for 1 second
1 melody sound to confirm
enters.
Press and hold for 3 seconds
2-melody sounds to confirm
enter.
Press and hold for 5 seconds
1 melody sound to confirm
enters.
Press within 3 seconds
Press within 3 seconds
Press within 3 seconds
)
Within 3 seconds press the
button until desired
time is set, then
flashes