Power On Memory; Remote Start Operation; To Remote Start The Vehicle - Autopage TRX96 Operation Manual

1. Press first, within 3 seconds press and hold
buttons at the same time for 2 seconds. Two beeping sound
and the " " icon will be displayed on the LCD screen to
indicate the second transceiver pin code is programmed.
2. While the " " icon is displayed on the LCD screen, you
can remote control and communicate with a second vehicle
security system. It has two short "bi" sounds while pressing the
button of the LCD screen transceiver.
Back to 1st Car Operation:
1. Press first, within 3 seconds press and hold
buttons at the same time for 2 seconds. One long beeping
sound and the "
LCD screen indicating the system is back to the first
transceiver pin code.
2. While the "
screen, you can remote control and communicate with the first
vehicle security system. It has one short "bi" sound while
pressing the button of the LCD screen transceiver.
Z. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to
remember its alarm state if the power is lost and then reconnected
.

REMOTE START OPERATION:

A. TO REMOTE START THE VEHICLE:
" timer icon will be displayed on the
" timer icon is displayed on the LCD
22
and
and