Active Arming - Arm & Lock; Defective Sensor Reminder; Silent Arming / Disarming; Shock Sensor By-Pass - Autopage TRX96 Operation Manual

Professional remote car starter with alarm system
Table of Contents

Advertisement

Siren / Horn
1. Arming
1 or 3 Chirps 1 Flash
2. Disarming
2 or 4 Chirps
3. Trigger
Alarming
4. Passive
Starter
Disable
5. Panic
Alarming
6. Car-Jacking Alarming
7. Car Locator 6 Chirps
G. ACTIVE ARMING – LOCK & ARM:
1. Press
button on the transmitter.
2.
The siren will chirp once and parking light will flash once indicating that the
system is now armed. The vehicle door will lock upon arming when
interfaced with the security system.
System Arm
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you
have left a door, trunk, or hoodlid ajar.
SILENT ARMING / DISARMING: Press the transmitter
the same time will arm or disarm your security system, No chirp sound will be
heard, arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR BY-PASS: Press the
within 3 seconds will arm the security system and by-pass the shock sensor.
The system will chirp one additional time to confirm the sensor bypass mode
was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle.
H. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive Arming
feature, which allows the security system to arm 30 seconds after the last door
is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle.
Parking
LED
Doors
Light
Slow
Locking
Flash
2 or 3
Unlocking
Flashes
Slow
Flashes
Flash
Fast
Flash
Flashes
Flashes
12 Flashes
Locking
Door Ajar
Trunk / Hood Ajar
button on the transmitter two times
14
Starter
Dome Light
Disable
Turns on for 30
-second
Disable
Flashes
Disable
Flashes
Disable
Flashes
Clear The Flash Icon:
Press the
times within 3 seconds
will clear the flash icon on
the LCD screen
transmitter.
and
button at
button 3

Advertisement

Table of Contents
loading

Table of Contents