Table of Contents
Advertisement
If someone tries to page you by tapping the paging (knock) sensor (optional)
which is usually mounted on the bottom part of front window, the paging
melody sound continues sounding from you Remote LCD Transmitter and
"
" indication flashes on the LCD screen.
1. Press the transmitter
seconds press
driver paging function, It responds with chirps of the
vehicle, a melody sound and "
on the LCD screen to confirm the function is on.
2. When tapping the paging (knock) sensor, one chirp
sound shall be emitted from the vehicle and the paging
melody sound continues sounding from you Remote
LCD Transmitter and "
LCD screen.
3.Turn on the ignition switch; OR press the
arm the system; OR press the
disarm the system, this outdoor driver paging function will
exit.
S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION
The alarm with a unique feature which will turn on your vehicle dome light as
following:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as
the siren.
Note: Turn on the ignition switch or arm the alarm will turn off the dome light.
T. IGNITION CONTROL DOOR LOCK/UNLOCK.
If the vehicles door locks have been interfaced to the security system, the
system will automatically lock the vehicle's doors when the ignition is turned
"ON" and /or unlock the vehicle's doors when the ignition is turned "OFF".
U. TRUNK RELEASE (CHANNEL 3) OUTPUT.
Press and hold
button on the transmitter for two
seconds to remote control the trunk release or other electric
devices.
V. CHANNEL 4 TIMER CONTROL OUTPUT
button first, within 3
(
) button to activate outdoor
" indication flashes
" indication flashes on the
button to
button to
20
Advertisement
Table of Contents
