C Programming Of The Lcd Remote Transmitter; Screen Lamp On; Power Save Mode; Clear The Flash Icon And Melody Sound - Autopage RS-727LCD Operation Manual

C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
LCD screen lamp turns on for
(1 second)
Timer Programming Mode.
(3 seconds)

Power Save Mode

(5 seconds)
Clear the Flash Icon and
- -
Melody Sound on the LCD
Screen Transmitter

Button Lock

-
(2-second)
Melody / Vibration
-
(2-second)
Mode
Program Count Down Timer
-
( )
(2-second)
(10-Minute / 20M / 30 M
/1Hour /1.5H / 2.0H)
Enable / Disable Bi Sound (Bi)
-
(2-second)
While Pressing Button

1. Screen Lamp ON:

Press and hold the
sound and the LCD screen lamp will turn on for 5 seconds.
2. Power Save Mode:
While in the power save mode, the
LCD remote transmitter uses "0" current to save the battery
power.
Entry: Press & hold the button for 5 seconds, one
melody will sound and the
screen indicates entry of the "power save mode".
Exit: Press any button of the LCD remote transmitter to
exit the "Power Save Mode".

3. Clear the Flash Icon and Melody Sound:

within 3 seconds will clear the flash icon and the melody sound on the LCD screen
transmitter.
4. Stop The Trigger Melody Sound:
alert the user through a melody sound and a flashing trigger icon. Press any button
on the LCD remote transmitter to stop melody sound only.
5. Button Lock:
This is useful if you want to disable the
transmission function of the remote control temporarily to
prevent from any inadvertent pressing of buttons by others.
Press the button first, within 3 seconds press and hold
( )
button for 2 seconds to activate or cancel the button
lock function, the icon will displayed on the LCD screen to
show the LCD remote transmitter is on "Button Lock"
Description Operation
Press and hold for 1 second
5 seconds. 1 melody sound to confirm enters.
Press and hold for 3 seconds
2-melody sounds to confirm enter.
Press and hold for 5 seconds
1 melody sound to confirm enters
Press within 3 seconds
Press within 3 seconds and Hold
( )
enable /
button for 2 seconds
disable
Press within 3 seconds and Hold
( )
button for 2 seconds
Press within 3 seconds cycling
*leave the buttons starting count
down then
Press within 3 seconds and Hold
button for 2 seconds
button one second, one melody will
icon on the LCD
Pressing the
While triggering the alarm the LCD screen will
7
flashes
button 3 times