Security Menu - HP OmniBook 3000 Reference Manual

Setting Up the OmniBook
Configuring the OmniBook
System Devices Menu (continued)
Audio
SB I/O address*
WSS I/O address*
AdLib I/O address*
Interrupt*
1st DMA channel*
2nd DMA channel*
MPU Device
MPU I/O address*
Interrupt*

Security Menu

System Password is
Set System Password
Password on Boot
Password on Resume*
2-8
Sets how the audio system is configured: by
the BIOS (specified or automatic) or by a PnP
operating system.
Sets the Sound Blaster I/O address.
Sets the Windows Sound System I/O address.
Sets the AdLib synthesizer I/O address.
Sets the interrupt.
Sets the DMA channel for playback.
Sets the DMA channel for recording.
Sets how the MIDI capability is configured: by
the BIOS (specified or automatic) or by a PnP
operating system. The port replicator provides
a MIDI port, but not the OmniBook.
Sets the MIDI I/O address.
Sets the interrupt.
Shows whether a password is set.
Press ENTER to set, change, or clear the
password and save all Setup changes. (Up to 8
alphanumeric keys, prefix keys ignored.)
Sets whether the password is required to boot.
Sets whether the password is required to
continue after Suspend and Hibernate.
Default
Enabled
220h
530h
388h
IRQ5
DMA1
DMA0
Disabled
330h
IRQ9
Default
Clear
Disabled
Disabled