Solving Problems; Accessory Problems - HP OmniBook 3000 Reference Manual

Hp omnibook 3000: reference guide
Hide thumbs Also See for OmniBook 3000:
Table of Contents

Advertisement

Solving Problems

If your OmniBook has a problem, find the symptom below that matches your
situation. Try the suggestions one at a time.

Accessory Problems

If a port replicator port isn't working
Check that ac power is connected.
Try using the corresponding OmniBook port, while undocked.
If you can't boot from a CD in the CD-ROM drive
Check boot order in BIOS Setup (Boot menu).
Make sure you are using an internal OmniBook CD-ROM drive. You cannot boot
from an external CD-ROM drive.
Check that the CD is bootable.
Reset the OmniBook.
If the Zip drive isn't working
Make sure the Zip drive is seated correctly—remove and reinsert.
Check that drivers have been installed.
Reset the OmniBook.
Troubleshooting
Solving Problems
8-3

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents