Select
Ignore changes and exit
Save changes and exit
Security menu
NOTE:
Some of the menu items listed in this section may not be supported by your computer.
Select
Administrator Tools
Setup BIOS Administrator Password
User Management (requires a BIOS administrator password)
Create New BIOS User Account
Password Policy (requires a BIOS administrator password)
HP SpareKey
Always Prompt for HP SpareKey Enrollment
Fingerprint Reset on Reboot (if present)
User Tools
Change Password
HP SpareKey Enrollment
Anti Theft
AT-p
DriveLock Passwords
Automatic DriveLock
112
Chapter 5 Computer Setup
Downloaded from LpManual.com Manuals
To do this
Cancel any changes entered during the current session. Then,
exit and restart the computer.
Save any changes entered during the current session. Then,
exit and restart the computer. Your changes go into effect
when the computer restarts.
To do this
Set up a BIOS administrator password.
●
Select from a list of BIOS users.
●
Select from a list of ProtectTools users.
Revise password policy criteria.
Enable/disable HP SpareKey (enabled by default).
Enable/disable HP SpareKey enrollment (enabled by default).
Reset/clear the fingerprint reader ownership (select models
only; disabled by default).
Enter, change, or delete a BIOS administrator password.
Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.
Enable/disable Anti-Theft Protection.
●
Enable/disable DriveLock on any computer hard drive
(enabled by default).
●
Change a DriveLock user password or master password.
NOTE:
DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
Enable/disable Automatic DriveLock support.