Infrared Problems - HP OmniBook 3000 Reference Manual

Infrared Problems

If you have problems with infrared communications
Make sure the infrared light path is not blocked.
Check settings in BIOS Setup—from the System Devices menu, check that
Infrared Port is enabled.
For infrared communications, an infrared driver must be installed and a BIOS
Setup setting must be enabled. For details, refer to the drivers' Readme files
located in \OmniBook\drivers\Win95.
Check that only one application is using the infrared port.
If you have a Standard IR and Fast IR machine communicating with each other,
make sure that they are set to the highest common speed (115200 baud).
Remove any PC Cards. An IRQ conflict is possible if two PC Cards are plugged
in.
If an infrared printer doesn't print
Make sure the infrared light path is not blocked.
An infrared driver must be installed and the BIOS Setup setting must be enabled.
For details, refer to the drivers' Readme files located in
\OmniBook\drivers\Win95.
In Windows Help, use the Print Troubleshooter.
Troubleshooting
Solving Problems
8-7