Keyboard, Mouse, And Touchpad Problems - HP OmniBook 3000 Reference Manual

Troubleshooting
Solving Problems

Keyboard, Mouse, and TouchPad Problems

If the pointer is difficult to control
Adjust the pointer settings using the Mouse icon in Control Panel.
If the TouchPad doesn't work
Make sure you don't have an external mouse connected to the OmniBook.
If you just disconnected an external mouse, try exiting and restarting Windows
to make the OmniBook TouchPad active again.
Press the blue power button to suspend the OmniBook, then turn it on again
without moving the pointer.
Reset the OmniBook.
If the embedded numeric keypad doesn't work
Press and hold the Fn key to temporarily access the embedded keypad.
If a PS/2 keyboard and mouse with Y-adapter don't work
This configuration is not supported. (You can use a port replicator or a serial
mouse.)
If you have problems with the TouchPad response
Check settings in Control Panel.
8-6