Table of Contents
Advertisement
Closing the Setup Utility
You can close the Setup Utility with or without saving changes.
●
To close the Setup Utility and save your changes from the current session, use either of the
following procedures:
◦
Press f10, and then follow the instructions on the screen.
— or —
◦
If the Setup Utility menus are not visible, press
the arrow keys to select Exit > Exit Saving Changes, and then press enter.
When you use the
When you use the Exit Saving Changes procedure, the Setup Utility closes when you press
enter.
●
To close the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
After the Setup Utility closes, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE:
Some of the Setup Utility menu items listed in this section may not be supported by your
computer.
Main menu
Select
System information
Security menu
Select
Administrator password
Power-On Password
f10
procedure, you are offered an option to return to the Setup Utility.
esc
to return to the menu display. Then use
esc
to return to the menu display. Then use the
To do this
●
View and change the system time and date.
●
View identification information about the computer.
●
View specification information about the processor,
memory size, system BIOS, and keyboard controller
version (select models only).
To do this
Enter, change, or delete an administrator password.
Enter, change, or delete a power-on password.
Closing the Setup Utility
75
Advertisement
Table of Contents
