To Install The Online User's Handbook; To Use The Recovery Cd Programming Service - HP OmniBook 3000 Reference Manual

To install the online User's Handbook

You can install the online User's Handbook from the Recovery CD. This also installs
OmniBook Notes and Support files to your hard drive.
1. Connect the ac adapter to the OmniBook.
2. If you have an internal CD -ROM drive , install it in the OmniBook.
–or–
If you have a PC Card or parallel port CD
parallel port CD-ROM drive. See "To set up a PC Card or parallel port CD-ROM
drive" on page 7-5.
3. Insert the Recovery CD in the CD-ROM drive.
4. From the \OmniBook\Hputils\Disk1 directory on the CD, double-click
setup.exe . The OmniBook Application Software Setup screen appears.
5. Click Next.
6. Click "OmniBook Online Documentation."
7. Click Install Now.

To use the Recovery CD programming service

If you need to recover an operating system, OmniBook drivers, or any other program
on the Recovery CD, but do not have access to a CD-ROM drive, HP Service can
recover these files for you. The cost is a standard charge equal to one-half the hourly
labor rate. This service is available for the OmniBook Recovery CD only. Microsoft
CDs and other non-HP CDs do not qualify for this service.
Installing Software
Recovering OmniBook Files
-ROM drive , connect the PC Card or
7-9