6. OTHERS MENU
6.2
Wheel Setting Menu
One of the following functions can be assigned to the scrollwheel.
• Tilt angle (Horizontal display only)
• Gain
• Range
• Bearing (Vertical display only)
1. Click [Wheel Setting] on the [Others] menu.
This menu can be also opened from the pop-up menu.
2. Click [H Mode] or [V Mode].
3. Click the function to assign to the scrollwheel.
4. Click [Quit] on the setting box to close the box.
5. Long-push the MENU/ESC key to close all menus.
6-2
Wheel Setting
H Mode
: Tilt Angle
V Mode
: Bearing
Quit
Cancel
Tilt Angle
Range
Gain
H Mode
Quit
Quit
Cancel
Range
Gain
Bearing
V Mode