Table of Contents
Advertisement
8. MAINTENANCE, TROUBLESHOOTING
8.9
Error Codes
The equipment displays a (blinking) three-digit error code at the bottom of the display
when it detects internal trouble. In case of multiple error, error codes appear in numer-
ical order and the maximum number of error codes is five. The codes remain on the
screen until the corresponding trouble is fixed, and a buzzer sounds each time a new
error code is added to the on-screen error code display. For any error code, report er-
ror code number to your dealer.
* * * Error Code * * *
8.10
Status Messages
Status messages appear at the screen center to alert the operator. These are as be-
low.
Status message
"TX OFF"
"RAISE/LOWER TEST"*
"UNREGISTERED"
*Not displayed when TX is OFF.
8-10
#003, #006, #108
Status messages and their meanings
Transmission turned off from the menu.
Raise/lower command received from the control unit in normal opera-
tion, to manually test raise/lower switch in hull unit. Raise/lower keys
on the control unit are inoperative during the hull unit test.
The transducer position mark cannot display transducer position be-
cause transducer position has not been registered. Ask your dealer to
register transducer position.
Meaning
Advertisement
Table of Contents
Troubleshooting
