How To Save Still Images - Furuno FSV-25S Operator's Manual

7. RECORD/RECALL OPERATION
7.2

How to Save Still Images

You can save the picture on the display as a still image.
Single display
1. Right click the numeric/graphic data display to show the pop-up menu.
2. Select [Record/Recall] then push the left button.
3. Select [Record Still Image] then push the left button.
The picture at the moment the button is pushed is shown on the display for approx.
four seconds. The still image data is saved at the location selected at section 7.1.
Date and time are used for the name of the data automatically.
• Still image: "yyyy_mm_dd_hh_mm_ss.jpg"
• Setting: "RECORD_yyyy_mm_dd_hh_mm_ss.dat"
Note 1: The default function of the F1 key saves the still image window.
Note 2: You can select how long to show the preview display. See your dealer for de-
tails.
Dual display
Select the monitor on which to capture the still image, 1: main monitor, 2: sub monitor.
1. Right click the numeric/graphic data display to show the pop-up menu.
2. Click [Record/Recall].
3. Click [Still Image].
The still image can be saved on the above window by clicking the [•] button.
4. Select the monitor on which to capture the still image from the monitor list.
1: main monitor, 2: sub monitor.
5. Click [Quit] on the [Still Image] window to close the window.
7-2
Still Image
File Name Disk Info
File name list
Quit
Monitor
1
Monitor list