Es1 Setting Menu Overview - Furuno FSV-84 Operator's Manual

5.9

ES1 SETTING Menu Overview

Display the ES1 SETTING menu as follows.
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select ES1 SETTING and press the [MENU] key.
ES1 setting menu description
The GAIN, RANGE, SHIFT and PICTURE ADVANCE are described at the
previous pages. For the COLOR SETTING and the COLOR RESPONSE, see
page 2-48 and 2-49, respectively.
CLUTTER: Suppress low level noise, which shows itself on the display as
light-blue dots. The setting range is 0-10 and 0 is clutter rejection off. The higher
the setting, the greater the degree of suppression.
SIGNAL LEVEL: Dirty water or reflections from plankton may be painted on the
screen in green or light-blue. These echoes may be erased in order of strength.
The setting range is 0-15.
INT REJECT: Turn on to suppress interference from other equipment on board.
PICT ADVC AT SHOOT: Sets picture advance speed to set when shooting of
the net. You may select advance speed independently or synchronize it with
ship's speed.
SCALE POSITION: The range scale can be displayed on the right or left side of
the echo sounder display.
MENU
OTHERS
ES1 SETTING
GAIN : 5
RANGE : 160 m
SHIFT : 0 m
CLUTTER : 0
SIGNAL LEVEL : 0
INT REJECT : OFF
PICTURE ADVANCE : 1/1
PICT ADVC AT SHOOT : SPEED SYNC
COLOR SETTING...
COLOR RESPONSE...
SCALE POSITION : RIGHT
ES1 SETTING menu
5. ECHO SOUNDER MODE
QUIT
QUIT
QUIT
5-15