Troubleshooting; Gas Heat Braising Pans; Electric Heat Braising Pans - Vulcan-Hart VG40 Installation & Operation Manual

GAS HEAT BRAISING PANS

Problem
Burners do not come on.
Burners produce carbon
deposits.

ELECTRIC HEAT BRAISING PANS

Problem
Heating elements do not
come on.

TROUBLESHOOTING

Possible Cause
1. The power supply is off.
2. The gas supply to the braising pan is off.
3. The thermostat is not turned on.
4. The gas valve is off.
5. The pan is not in the lowest position.
6. Problem with the gas control system. Contact your Vulcan
authorized servicer.
1. Braising pan frame is not level.
2. Wrong size orifices.
3. Burner air is not adjusted properly.
4. Wrong gas supply
5. Incorrect pressure at supply.
Possible Cause
1. The power supply is off.
2. The thermostat is not turned on.
3. Blown fuse in field electrical box.
4. Pan is not in the lowest position.
5. Problem with the control circuits. Contact your Vulcan
authorized servicer.
– 26 –