Table of Contents
Advertisement
TRENDnet User's Guide
4. In the left hand panel, click Tools, click on Configuration, and click Save.
5. Click Save Settings to Flash, then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2017 TRENDnet. All Rights Reserved.
View Access Profile List
Security > ACL > Access Profile List
The Access Profile List allows users to view the active ACL profiles.
1. Log into your switch management page (see
on page 7).
2. Click on Security, click ACL, and click on Access Profile List.
In the list, you can click Show Details to view the ACL Profile details, click Edit/New
Rules to edit or create rule details, or delete the entry. You can also click Delete All to
delete all of the entries in the table.
4. In the left hand panel, click Tools, click on Configuration, and click Save.
5. Click Save Settings to Flash, then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TEG-204WS
"Access your switch management
page"
76
Advertisement
Table of Contents
