TRENDnet TEG-204WS User Manual page 63

TRENDnet User's Guide
View LLDP System Information

Chassis ID Subtype: This parameter describes the Chassis ID subtype which is
"macAddress". You cannot change this parameter.

Chassis ID: This parameter lists the MAC Address of the switch.

You cannot change this parameter.

System Name: This parameter lists the System Name of the switch. You can
assign the system name.

System Description: This parameter lists the product name of the switch. You
cannot change this parameter
© Copyright 2017 TRENDnet. All Rights Reserved.
Set LLDP Port State
For each port, click the State drop-down list and choose from the following options.

Disabled: Indicates LLDP is disabled on the port. The port cannot receive or
transmit LLDP data packets.

RxTx: Indicates LLDP is enabled on the port. The port can receive and transmit
LLDP data packets.

RxOnly: Indicates LLDP is enabled on the port. The port can receive LLDP data
packets.

TxOnly: Indicates LLDP is enabled on the port. The port can transmit LLDP data
packets.
Note: You can select the row labeled ALL to apply settings to all ports.
Click Apply to save the settings.
4. In the left hand panel, click Tools, click on Configuration, and click Save.
5. Click Save Settings to Flash, then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
TEG-204WS
60