View The Current Vlan Database - TRENDnet TEG-204WS User Manual

TRENDnet User's Guide

Click on the Forwarding Ports ratio button that applies to your configuration.

Click Apply.
4. In the left hand panel, click Tools, click on Configuration, and click Save.
5. Click Save Settings to Flash, then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2017 TRENDnet. All Rights Reserved.

View the current VLAN database

Network > VLAN > Current
1. Log into your switch management page (see
on page 7).
2. Click on Network, click on VLAN, and click on Current.
3. View the current VLAN database in the table.
If the entries span multiple pages, you can navigate page number in the Page field and
click Go or you can click First, Previous, Next, and Last Page to navigate the pages.
TEG-204WS
"Access your switch management page"
52