If You Cannot Make Copies As You Want - Gestetner DSm651 Copy Reference Manual

If You Cannot Make Copies As You Want

Problem
Copies are not stapled.
Paper jams occur frequent-
ly.
You cannot combine sever-
al functions.
When sorting, the pages
are divided into two
blocks.
In Double Copies mode,
parts of the original image
are not copied.
In Border, Center, or Cen-
ter/Border mode, parts of
the original image are not
copied.
In Margin Adjustment
mode, parts of the original
image are not copied.
In Image Repeat mode, the
original image is not cop-
ied repeatedly.
Causes
There are jammed staples
in the stapler.
The number of copies ex-
ceeds stapler capacity.
Copy paper is curled.
The paper size is not cor-
rect.
Selected functions cannot
be used together.
The memory became full in
the middle of sorting and
the pages were delivered in
two blocks.
Combination of original
and copy paper is not cor-
rect.
You have set an erase mar-
gin that is too wide.
Originals are not scanned
correctly.
You have set an erase mar-
gin that is too wide.
There is a lack of margin
space on the opposite side
of the binding position
You selected copy paper
the same size as the origi-
nals, or you did not select
the proper reproduction
ratio.
If You Cannot Make Copies As You Want
Solutions
Remove jammed staples. See "Re-
moving Jammed Staples", General
Settings Guide.
Note
❒ After removing jammed staples,
staples might not eject the first
few times you try to use the sta-
pler.
Check the stapler capacity. See p.144
"Staple".
Turn the copy paper over in the
tray.
Set the correct paper size. See
"Changing the Paper Size", General
Settings Guide.
Check the combination of functions
and make the settings again.
Reference
⇒ p.137 "Combination Chart"
You can interrupt copying when the
memory becomes full. ⇒ p.134
"Memory Full Auto Scan Restart"
Select A3L for A4 K originals and
A4 for A5 originals (when using a
100% ratio).
Set a narrower margin with the User
Tools. You can set a margin between
2–99mm.
Set the originals correctly.
Set a narrower margin with the User
Tools.
Select copy paper larger than the
originals.
Select the proper reproduction ratio.
4
111