Display During Connect Copy - Gestetner DSm651 Copy Reference Manual

Message
This tray is un-
available because
the sub-machine
does not have the
same paper set-
ting(s).
No stamp data in
the sub-machine.
Cannot print from
sub-machine. Sub-
machine will be
disconnected.
Z-fold is avail-
able only when
Sort mode is se-
lected in Connect
Copy.

Display During Connect Copy

Problem
[ ] is not dis-
played.
[ ] appears faded.
Causes
Paper tray settings on the
two machines do not
match.
The stamp data on the sub-
machine has been deleted.
Sub-machine has stopped
because of a power failure
or communication error.
Sort has not been selected
with Z-fold.
Causes
The main power of the sub-
machine is off.
Functions that cannot be
used with Connect Copy
are selected on the main
machine (such as storing or
copying the first page of a
document in the Document
Server).
The main machine is in In-
terrupt mode.
The Connect Copy Key
Display setting is Off.
The cable connecting the
two machines is damaged.
The L L L L is lit.
Functions that cannot be
used with Connect Copy
have been set.
If Your Machine Does Not Operate As You Want
Solutions
Make the same settings on both ma-
chines.
Program the stamp again on the
sub-machine.
Continue copying using the main
machine.
Select the Sort function.
Solutions
Turn the main power of the sub-ma-
chine on.
Cancel the functions selected on the
main machine.
Press the { { { { Interrupt} } } } key on the sub-
machine to exit Interrupt mode.
Select [Display] for the Connect Copy
Key Display setting.
Contact your service representative.
Follow the instructions displayed.
Press the { { { { Clear Modes} } } } key to clear
the settings.
4
107