Gestetner DSm651 Copy Reference Manual page 116

Troubleshooting
Message
You do not have the
privileges to use
the following
function(s).
❖ ❖ ❖ ❖ Connect Copy
Message
Cannot connect to
the sub-machine.
Check the status
of the sub-ma-
chine.
4
Cannot print from
the sub-machine.
Check the status
of the sub-ma-
chine.
Sub-machine is in
Interrupt mode.
Sub-machine does
not have the same
paper setting(s).
The Cover Sheet
setting(s) of the
sub-machine is
different from the
main machine.
The Slip Sheet
setting(s) of the
sub-machine is
different from the
main machine.
The Chapter set-
ting(s) of the
sub-machine is
different from the
main machine.
106
Causes
The use of this function is
restricted to authenticated
users only.
Causes
The L L L L indicator is lit.
The hard disk of the sub-
machine is malfunctioning.
A paper misfeed has oc-
curred on the sub-machine,
or toner or other supplies
need to be replenished.
The User Tools menu of the
sub-machine is open.
The sub-machine is in In-
terrupt mode.
Paper type or tray settings
on the two machines do not
match.
Cover settings on the two
machines do not match.
Slip Sheet settings on the
two machines do not
match.
Chapter settings on the two
machines do not match.
Solutions
Contact the administrator.
Solutions
Press [Exit] on the main machine
and follow the instructions on the
display.
Follow the instructions displayed.
Reference
"Adding Toner", General Settings
Guide
"Clearing Misfeeds", General
Settings Guide
"Loading Paper", General Set-
tings Guide
If the sub-machine's display indi-
cates that a cover is open, follow the
instructions shown.
Press the { { { { User Tools/Counter} } } } key to
close the User Tools menu.
Press the { { { { Interrupt} } } } key on the sub-
machine to exit Interrupt mode. See .
Make the same settings on both ma-
chines.