Stack - Gestetner DSm651 Copy Reference Manual

Copying
Sample copy
You can use this function to check
copy settings before making a long
copy run.
Note
❒ This function can be used only
2
when the Sort function is turned
on.
A A A A
Select Sort and any other neces-
sary functions, and then place the
originals.
B B B B
Press the { { { { Sample Copy} } } } key.
One copy set is delivered as a sam-
ple.
C C C C
If the sample is acceptable, press
[Print].
The specified number of copies is
made, minus one for the sample
copy.
Note
❒ If you press [Suspend] after
checking the results, return to
A
step
tings as necessary. You can
change the settings for Staple,
Duplex, Co py Orientation,
Stamp, Margin Adjust., and
Cover/Slip Sheet. However, de-
pending on the combination of
functions, you may not be able
to change certain settings.
36
to adjust the copy set-
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
A A A A
While "
press the { { { { Clear/Stop} } } } key.
B B B B
Press [Change Quantity].
C C C C
Enter the number of copy sets us-
ing the number keys, and then
press the { { { { #} } } } key.
ZGVS040E
Note
❒ The number of sets you can en-
ter differs depending on when
the { { { { Clear/Stop} } } } key is pressed.
D D D D
Press [Continue].
Copying starts again.

Stack

This function groups together copies
of each page in a multi-page original.
Every other page stack is shifted for
ease of separation.
" is displayed,
Copying
3
2
1