If You Cannot Make Copies As You Want - Gestetner DSc224 Copy Reference Manual
Gestetner dsc224: operating instruction
Hide thumbs
Also See for DSc224:
- Tool reference (102 pages) ,
- Network manual (148 pages) ,
- Operating instructions manual (38 pages)
Table of Contents
Advertisement
Troubleshooting
If You Cannot Make Copies as You Want
This section explains causes and remedies when copy results are not as expect-
ed.
Problem
Copies are not stapled.
4
Staples are wrongly posi-
tioned.
You cannot combine sever-
al functions.
When sorting, the pages
are divided into two
blocks.
In Double Copies mode,
parts of the original image
are not copied.
In Border, Center, or Cent-
er/Border mode, parts of
the original image are not
copied.
In Margin Adjustment
mode, parts of the original
image are not copied.
88
Cause
There are jammed staples
in the stapler.
The number of copies ex-
ceeds the capacity of the
stapler.
Copy paper is curled.
Originals are not set cor-
rectly.
Selected functions cannot
be used together.
The memory became full in
the middle of sorting and
the pages were delivered in
two blocks.
Combination of original
and copy paper is not cor-
rect.
You set a wide erased mar-
gin.
Originals are not scanned
correctly.
You set a wide erased mar-
gin.
There is a lack of margin
space on the opposite side
of the binding position.
Action
Remove jammed staples. ⇒ General
Settings Guide
Note
❒ After removing jammed staples,
staples might not be ejected the
first few times you try to use the
stapler.
Check the stapler capacity. ⇒ p.108
"Supplementary Informations"
Turn the copy paper over in the
tray.
Check the correct position to place
the originals. ⇒ p.43 "Staple"
Check the combination of functions
and make the settings again.
Reference
⇒ p.107 "Combination Chart"
You can interrupt copying when the
memory becomes full. ⇒ p.105
"Memory Full Auto Scan Restart"
Select A3L for A4 K originals and
A4 for A5 originals.
Make the margin width narrower.
You can adjust it between 2-99mm.
⇒ p.101 "Erase Border Width" and
⇒ p.101 "Erase Center Width"
Set the originals correctly.
Set a narrower margin with the User
Tools. ⇒ p.101 "Front Margin:
Left/Right", ⇒ p.101 "Front Mar-
gin: Top/Bottom", ⇒ p.101 "Back
Margin: Left/Right", ⇒ p.101 "Back
Margin: Top/Bottom"
Advertisement
Table of Contents
