Configuring The Network Interface Board Settings - Gestetner DSc224 Network Manual

- - Linking the address (URL) to the [Help] button
- -
You can link the address (URL) of the [Help] button to the Help files on the com-
puter or on a Web server.
A Copy the Help files on the CD-ROM to the desired location. The Help files are
located in folders labeled with abbreviated language names; for example,
English Help files are in the [EN] folder. Make sure to copy the entire [EN] fold-
er to the new location.
B
Using a Web Browser, navigate to the Top Page and click [Network config].
C Type your password, (it is not necessary to type a user name) and click [OK].
D Type the path to the Help files in the [Help URL] box.
If you copied the Help files to "C:\HELP\EN", type "file ://C:/HELP/". For
example, if you copied the files to a Web server and the index URL is "ht-
tp://a.b.c.d/HELP/EN/index.html", type "http://a.b.c.d/HELP/".
E Click [Apply].
When a warning message appears, select to continue configuration.

Configuring the Network Interface Board Settings

A A A A
Start the Web Browser.
B B B B
Point your browser at the URL or IP address of the printer (e.g. ht-
tp://XXX.XXX.XXX.XXX where the Xs are the number of the IP address).
The status of the printer you chose appears on the Web Browser.
C C C C
Click [Configuration].
The dialog box for entering the password and user name is displayed.
D D D D
Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and type "password"
for the password.
E E E E
Click the item you want to configure, and then make all the settings.
The following items can be configured:
❖ ❖ ❖ ❖ [General]
Configure the general settings for the machine here.
❖ ❖ ❖ ❖ [IEEE 802.11b (Wireless LAN)]
Configure 802.11b Interface Kit settings related to communication.
Limitation
❒ This page is displayed when the 802.11b Interface Kit is installed.
Configuring the Network Interface Board with a Web Browser
7
91