Macintosh Configuration; Configuring Macintosh - Gestetner DSc224 Network Manual

6. Macintosh Configuration

Configuring Macintosh

This section describes how to configure a Macintosh computer to use EtherTalk.
The actual procedures to configure a Macintosh may vary depending on the ver-
sion of the Mac OS. The following procedure describes how to configure Mac OS
9.1. If you are not using Mac OS 9.1, see the manual that comes with your version
of Mac OS for more information.
Basic Procedure
Change to EtherTalk
Configure the printer
Change the printer name
Change the zone
Limitation
❒ The required version of Mac OS is 8.6 or later. (Mac OS X Classic environment
is supported.)
Note
❒ To print from a Macintosh, the optional module that includes PostScript 3
must be expanded.
❒ To use a Macintosh, you need to install Adobe PS Printer Driver from the CD-
ROM with the module that includes PostScript 3.
81