Gestetner DSc224 Network Manual page 117

SPRINT
Use the sprint command to view and configure SCSI print (SBP-2) of the IEEE
1394.
Limitation
❒ You can use this function when the optional IEEE 1394 Board is installed.
❖ ❖ ❖ ❖ Viewing settings
The following command displays the current IEEE 1394 (SCSI print) settings.
msh> sprint
❖ ❖ ❖ ❖ Bidirectional configuration for the IEEE 1394 (SCSI print)
msh> sprint bidi {on|off}
Use this setting to configure whether the IEEE 1394 (SCSI print) is bidirectional.
The factory default is "on".
SMB
Use the smb command to configure or delete the computer name or workgroup
name for NetBEUI.
msh> smb parameter
Parameter
comp
group
comment
clear comp
clear group
clear comment
Note
❒ You cannot use the computer name starting with RNP or rnp.
Settings
Your computer name consisting of up to 13 characters
Workgroup name consisting of up to 15 characters
Comment consisting of up to 31 characters
Clears the computer name
Clears the Workgroup name
Clears comment
Remote Maintenance by telnet
7
111