Configuring The Network Interface Board - Gestetner DSc224 Network Manual

Appendix

Configuring the Network Interface Board

The Network Interface Board settings can be displayed by using the commands
below.
• telnet : Use the show command. See p.107 "Network Interface Board config-
uration settings information" .
Item name
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
NetBEUI
IP over 1394
SCSI print
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
7
Location
Contact
Soft switch
AppleTalk
Mode
Net
Object
Type
Zone
122
Meaning
Up means active, Down means inactive.
*1
*1
Internal version number.
Internal version number.
AppleTalk protocol in selection.
Network number.
Macintosh printer name.
The type of printer.
Name of the zone that the printer belongs to.