Gestetner DSc224 Network Manual page 134

Network printing guide
Hide thumbs Also See for DSc224:
Table of Contents

Advertisement

Appendix
Message
inetd start.
<interface> started with IP: <IP address>
<Interface>: Subnet overlap.
IPP cancel-job: permission denied.
ipp disable.
ipp enable.
IPP job canceled. jobid=%d.
job canceled. jobid=%d.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
Login to fileserver <file server name>
7
(<IPX|IP>,<NDS|BINDERY>)
multid start.
nbstart start. (NetBEUI)
NBT Registration Broadcast(<NetBIOS
name>)
nbtd start.
NetBEUI Computer Name =<computer name> The NetBEUI Computer Name is defined as
nmsd start. (NetBEUI)
npriter start. (NetWare)
nwstart start. (NetWare)
Open log file <file name>
papd start. (AppleTalk)
128
Description and Solutions
An inetd has started.
<IP address> has been set for <Interface> and
<Interface> started.
Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
for another interface.
Set Subnet so that it does not overlap with an-
other interface.
The printer could not authenticate the name of
the user attempting to cancel a job.
Printing with ipp is disabled.
Printing with ipp is enabled.
The spooled job has been canceled due to an
error or by user request.
The spooled job has been canceled due to an
error or by user request.
The resource lease time that was received
from the DHCP server is <lease time> in sec-
onds. The renewal time is also <renew time>
in seconds.
(In print server mode) Logged in to the file
server with NDS or BINDERY mode.
Data transmission service for multiprotocols
has started.
The service for NetBEUI protocol stack setting
has started.
Use a local broadcast to map <NetBIOS
name> with the IP address.
A nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
<computer name>.
A nmsd (Name Server Daemon) has started.
(In remote printer mode) NetWare service has
started.
The service for NetWare protocol stack setting
has started.
(In print server mode) The specified log file
has been opened.
AppleTalk print service has started.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc232

Table of Contents