Gestetner CS555 Copy Reference Manual page 181

Gestetner cs555: reference guide
Table of Contents

Advertisement

Specifications
❖ ❖ ❖ ❖ Duplex
• You cannot use the following copy paper with this function:
• Paper smaller than A5, 5
• Thick paper (Thick 2)
• Thin paper (Thin)
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Postcards
• Envelopes
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• Front and back image quality of copies may differ.
❖ ❖ ❖ ❖ Combine
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25–400%.
7
• If the calculated ratio is under the minimum ratio, it will be automatically
adjusted to within acceptable range. However, with some ratios, parts of
the image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment will be left blank as shown.
168
" × 8
1
1
/
/
" (possible on A5K, 5
2
2
" × 8
1
1
/
/
"K)
2
2

Advertisement

Table of Contents
loading

Table of Contents