Placing Originals On The Exposure Glass; Placing Originals In The Auto Document Feeder - Gestetner CS555 Copy Reference Manual

Placing Originals
Placing Originals on the
Exposure Glass
1
Reference
For related default settings, see
p.155 "Eject Copy Face Up / Down
in Glass Mode".
A A A A
Lift the ADF.
Important
❒ Do not lift the ADF forcefully.
O t h e r w i s e , t h e A D F c o v e r
might open or be damaged.
Note
❒ Be sure to lift the ADF more
than 30°. Otherwise, the size of
the original might not be detect-
ed correctly.
B B B B
Place the original face down on
the exposure glass. It should be
aligned with the left scale.
1.
Positioning mark
2.
Left scale
Note
❒ Start with the first page to be
copied.
C C C C
Lower the ADF.
14
Placing Originals in the Auto
Document Feeder
Settings should be made accordingly
in the following situations:
❖ ❖ ❖ ❖ When placing originals consisting of
more than 100 pages:
p.15 "Batch"
❖ ❖ ❖ ❖ When placing originals one by one:
p.16 "SADF"
❖ ❖ ❖ ❖ When placing originals of the same
width but different sizes:
p.16 "Placing originals of mixed
sizes"
❖ ❖ ❖ ❖ When placing custom size originals:
p.17 "Placing custom size origi-
nals"
Note
❒ Do not stack originals above the
limit mark on the side guide of the
ADF.
❒ The last page should be on the bottom.
❒ When you copy two-sided origi-
nals, both front and back sides of
each original are scanned at once.
❒ Do not place objects on the sensors
or cover them with your hands, or
the original size may not be detect-
ed properly.
ZGMH012E
1.
Sensors
ADB028S