Table of Contents
Advertisement
User Tools (Copier / Document Server Features)
Accessing User Tools (Copier / Document
Server Features)
This section is for key operators in
charge of this machine. With User
Tools can change the machine's de-
fault settings.
Note
❒ Be sure to exit User Tools and re-
turn to the initial copy display af-
ter all settings are finished. This
section describes system settings
you can set for the copier function.
❒ The selected key is highlighted.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the { { { { Clear
6
Modes} } } } key is pressed.
Reference
For details, see "Changing Default
Settings" in "User Tools (System
Settings)", General Settings Guide.
Changing Default Settings
A A A A
Press the { { { { User Tools/Counter} } } } key.
The User Tools main menu ap-
pears.
140
Note
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the au-
thentication screen will be dis-
played. Enter your login name
and login password, and then
press [Login].
B B B B
Press [Copier / Document Server Features].
The Copier / Document Server
Features menu is displayed.
C C C C
Select the menu you want to set.
The setting display for each menu
is displayed.
Reference
See p.133 "User Tools Menu
(Copier / Document Server Fea-
tures)".
D D D D
Change settings by following the
instructions on the display panel,
and then press [OK].
Exiting User Tools
A A A A
After changing default settings, press
[Exit] on the User Tools main menu.
Changes to User Tools are complete,
and the machine is ready to copy.
AFU159S
Note
❒ You can also exit User Tools by
pressing the { { { { User Tools/Counter} } } }
key.
Advertisement
Table of Contents
