Stack; Staple - Gestetner CS555 Copy Reference Manual

Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
A A A A
While "
Copying...
press the { { { { Clear/Stop} } } } key.
B B B B
Press [Change Quantity].
C C C C
Enter the number of copy sets us-
ing the number keys, and then
press the { { { { #} } } } key.
Note
❒ The number of sets you can en-
ter differs depending on when
the { { { { Clear/Stop} } } } key is pressed.
D D D D
Press [Continue].
Copying starts again.

Stack

This function groups together copies
of each page in a multi-page original.
Every other page stack is shifted for
ease of separation.
A A A A
" is displayed,
B B B B
C C C C

Staple

Individual copy sets can be stapled.
❒ If you select Saddle Stitch without
❒ You cannot use the bypass tray
Press [Stack].
Enter the number of copies using
the number keys.
Place the originals, and then press
the { { { { Start} } } } key.
Note
❒ When placing originals on the
exposure glass, start with the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
Important
having the stapler cartridge for
Saddle Stitch set in the Finisher
MEC BK (saddle stitch), a paper
misfeed might occur.
Note
with this function.
Copier Functions
2
45