Accessing User Tools (Facsimile Features); Quitting Default Settings - Gestetner DSm635sp Fax Manual

Accessing User Tools (Facsimile Features)

Customize the facsimile settings ac-
cording to the operations to be fre-
quently performed.
Note
r The machine allows you to change
the facsimile defaults in a mode
that is not the facsimile mode. Af-
ter changing the defaults, select
facsimile mode again. This section
describes the facsimile defaults
that the machine allows you to cus-
tomize.
r Customized facsimile defaults are
kept until the defaults are changed
again. The new settings are not
cancelled by turning off the main
power switch or the Operation
switch or pressing the {Clear
Modes} key.
Reference
For the items that can be changed
using System Settings, see "User
Tools (System Settings)", General
Settings Guide.
A
Press the {User Tools/Counter} key.
The main menu display for default
settings appears.
Note
r With a Key Operator Code pro-
grammed, changing the default
causes the Key Operator Code
entry display to appear. If this
h a p p e n s , e n t e r t h e p r o -
grammed code first. For the Key
Operator Code, see the General
Settings Guide.
Accessing User Tools (Facsimile Features)
B
Press [Facsimile Features].
The menu display for facsimile de-
fault settings appears.
C
Select the item that you want to
change.
The corresponding setting display
appears.
Reference
p.137 "Function List"
D
Follow the displayed instructions
to change the default, and then
press [OK].
Note
r If you make a mistake, press
[Cancel].

Quitting Default Settings

A
After changing the defaults, press
[Exit] on the main menu display
for default settings.
The standby display appears.
Note
r You can also press the {User
Tools/Counter} key to quit the
main menu display for default
settings.
8
141