Other Functions; Energy Saver Mode-Saving Energy; Interrupt-Temporarily Stopping One Job To Copy Something Else - Gestetner 3222 Copy Reference Manual

Other Functions

Energy Saver Mode—Saving
Energy
If you do not operate the machine for
a certain period after copying, or
when you press and hold the {Energy
Saver} key for more than one second,
the display goes blank and the ma-
chine enters Energy Saver mode.
When you press the {Energy Saver}
key again, when the originals are set
in the document feeder, or when the
platen cover or document feeder is
opened, the machine returns to the
ready condition. In Energy Saver
mode, the machine uses less electrici-
ty.
Energy Saver mode makes a two-step
reduction in electricity: one for the pe-
riod up to the time set for Low Power
mode, the other for the period after
that time.
Note
The period for which the machine
remains in Energy Saver mode (i.e.
the period until the mode is turned
off to return to the ready condi-
tion) varies with the effectiveness
of energy saving.
Reference
See "06. Panel Off Timer", "07. En-
ergy Saver Level", "08. Energy
Saver Timer" of the System Set-
tings Reference.
Interrupt—Temporarily
Stopping One Job to Copy
Something Else
You can make urgently needed copies
during a multi-copy run.
Note
The procedure for making inter-
rupt copies depends on which
kind of operation the machine is
currently carrying out.
While a document is being fed
A
Press the {Interrupt} key.
The key indicator lights.
B
Remove the originals currently
set for copying, and set your orig-
inals for interrupt copying.
Reference
For functions that cannot be
used together with this func-
tion, see P.80 "Combination
Chart".
C
Press the Start key.
The machine starts making your
copies.
D
After interrupt copying, remove
the originals for interrupt copy-
ing and the copies.
E
Press the {Interrupt} key again.
The key indicator goes off.
F
Reset the previous originals.
Then press the {Start} key.
Other Functions
2
47