Table of Contents
Advertisement
Copying
Other Functions
Energy Saver Mode
If you do not operate the machine for a certain period after copying, or when you
press and hold the {Clear Modes/Energy Saver} key for more than one second, the
2
display disappears and the machine enters Energy Saver mode. When you press
the {Clear Modes/Energy Saver} key again, when the originals are set in the docu-
ment feeder, or when the document feeder is opened, the machine returns to the
ready condition. In Energy Saver mode, the machine uses less electricity.
Energy Saver mode makes a two-step reduction in electricity: one for the period
up to the time set for Low Power mode, the other for the period after that time.
Note
If you press the {Clear Modes/Energy Saver} key during the operation, the cur-
rent settings will be cleared.
It takes about 10 seconds to return to the ready condition from Energy Saver
mode.
It takes about 30 seconds to return to the ready condition from Low Power
mode.
If you press the {Clear Modes/Energy Saver} key while setting Connect Copy,
Connect Copy mode is canceled and the machine returns to the initial condi-
tion of Copy mode.
If you press the [Connect] key on the master unit, the sub-unit exits Energy
Saver mode and enters Connect Copy mode.
In Connect Copy mode, the sub-unit will not enter Energy Saver mode.
Reference
See "Low Power Timer" in the System Settings manual.
Interrupt Copy
Use this function if you wish to interrupt a long copy job to make urgently need-
ed copies.
Note
The procedure for making interrupt copies depends on which kind of opera-
tion the machine is currently carrying out.
You can use Document Server mode in Interrupt Copy mode.
In Connect Copy mode, you cannot use the Interrupt Copy function on the
master unit.
In Connect Copy mode, you cannot use the Interrupt Copy function on the
sub-unit while the master unit is scanning an original.
88
Advertisement
Table of Contents
