Copying From The Bypass Tray - Gestetner 3222 Copy Reference Manual

Copying from the Bypass Tray

The optional bypass tray is required to use this function.
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, post cards, and copy pa-
per that cannot be set in the paper
tray.
Note
The machine can automatically de-
tect the following sizes as standard
size copy paper:
Metric A3L, A4L, A5L, 8"
version 13"L
Inch
11" 17"L, 8
version
8" 13"L, 8
1
5 / " 8
2
If you do not use standard size
copy paper, you should input ver-
tical and horizontal dimensions.
The sizes that you can input are as
follows:
Metric • Vertical: 90 – 305mm
version
• Horizontal: 148 –
432mm
Inch • Vertical: 3.5" – 12"
version
• Horizontal: 6.0" – 17.0"
Reference
For details about paper capacity of
the bypass tray, see
Paper".
1
/ " 14"L,
2
1
/ " 11"L,
2
1
/ " L
2
P.19 "Copy
Copying from the Bypass Tray
A
Open the bypass tray.
B
Push up the paper guide release
lever.
1: Paper guide release lever
C
Lightly insert the copy paper face
down and adjust the paper guide.
2
41