Gestetner 3222 Copy Reference Manual page 115

What to do If Something Goes Wrong
F
Square the paper and set it in the
tray.
3
Important
Do not stack paper over the lim-
it mark.
G
While pressing the release lever,
adjust the side fences to the new
paper size.
Important
When setting small quantities of
copy paper, be careful not to
squeeze in the side fence too much
or paper will not be fed properly.
H
Lock the side lever.
104
I
While pressing the release lever,
adjust the back fence to the new
paper size.
J
Adjust the tray size with the pa-
per size selector to the new paper
size.
Note
If you cannot find your desired
paper size, select "p", then set
the copy paper size with the "11
Special Pap. Size" setting in the
System Settings manual.
K
Push the paper tray in until it
stops.