If Your Machine Does Not Operate As You Want; Message - Gestetner 3222 Copy Reference Manual

3. What to do If Something
If Your Machine does not Operate as You
Want

Message

Machine's Condition Problem/Cause
The machine instructs
you to wait.
The machine cannot
detect the original
size.
The machine instructs
you to check the origi-
nal direction.
The machine instructs
you to check paper
size.
The machine cannot
staple this size paper.
The machine is warming up.
Unsuitable original is set. See
P.17 "Sizes Difficult to De-
tect".
Original is not set.
There is no copy paper that is
the same direction as the orig-
inals.
Unsuitable original size is set. Select the proper paper size.
--
Goes Wrong
Action
Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during the warm-up
period. See
Start—Entering Copy Job
Settings During the Warm-
up Period"
Set non-standard size original
on the exposure glass.
Input the both horizontal and
vertical sizes of the non-stan-
dard original. See
ting Originals on the Exposure
Glass".
Select paper manually, not in
Auto Paper Select mode.
Do not use Auto Reduce/En-
large mode.
Set your originals.
Set the original in the same di-
rection as the copy paper.
Select the proper paper size
that can be used in Staple
mode. See P.38 "Staple"
P.48 "Auto
P.27 "Set-
83