Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
When the initial setting screen is displayed
When the projector is switched on for the first time after purchase, or when the [PROJECTOR SETUP] menu →
[INITIALIZE] → [FACTORY RESET] is executed, the focus adjustment screen is displayed after the projection
starts, followed by the [INITIAL SETTING] screen and the [ADMINISTRATOR ACCOUNT] screen. If the
[PROJECTOR SETUP] menu → [INITIALIZE] → [NETWORK/E-MAIL ONLY] is executed, the [ADMINISTRATOR
ACCOUNT] screen is displayed after the projection starts. Set them according to the circumstances.
In other occasions, you can change the settings by menu operations.
If you press the <菜单> button while the [INITIAL SETTING] screen is displayed, you can go back to the previous
screen.
Focus adjustment
Adjust the focus to display the menu screen clearly.
You may also need to adjust the zoom and lens shift.
Refer to "Adjusting the focus, zoom, and lens shift" (x page 79) for details.
1)
Press asqw to adjust the focus.
2)
Press the <菜单> button to proceed to the initial setting.
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1)
Press as to select the display language.
2)
Press the <执行> button to proceed to the initial setting.
镜头
聚焦
52
聚焦位置
调整
初始设定
请选择显示语种
选择
设置
执行
1/7
ENGLISH - 67
Advertisement
Table of Contents
