Introduction For Buttons Of Remote Controller - Toyotomi UTN-18AP User Manual

INTRODUCTION FOR ICONS ON DISPLAY SCREEN
Note:
q This is a general use remote controller, it could be used for the air
conditioners with multifunction; For some function, which the model does
not have, if press the corresponding button on the remote controller that
the unit will keep the original running status.
q After putting through the power, the air conditioner will give out a sound.
Operation indictor
by using remote controller.
q Under on status, pressing the button on the remote controller, the signal
icon on the display of remote controller will blink once and the air
conditioner will give out a "de" sound, which means the signal has been
sent to the air conditioner.
1 ON/OFF button
Press this button to turn on the unit. Press this button again to turn off the unit.
2 MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically
according to the sensed temperature.
● After selecting cool mode, air conditioner will operate under cool mode.
Cool indicator
some models). Press or button to adjust set temperature. Press «FAN»
button to adjust fan speed. Press
● When selecting dry mode, the air conditioner operates at low speed
under dry mode. Dry indicator
not available for some models). Under dry mode, fan speed cannot be
adjusted. Press
● When selecting fan mode, the air conditioner will only blow fan, no cooling
and no heating. All indicators are OFF, Operation indicator is ON. Press
«FAN» button to adjust fan speed. Press
angle.
is ON. After that, you can operate the air conditioner
on indoor unit is ON (This indicator is not available for
on indoor unit is ON (This indicator is
/ button to adjust fan blowing angle.
77
/ button to adjust fan blowing angle.
/ button to adjust fan blowing
GB